Fabrication of the Monolithic Fiber for the Solid Phase Micro‐extraction of Malachite Green

A monolithic fiber of molecularly imprinted polymer (MIP) was prepared by in situ polymerization within the capillary with an inner diameter of 530 µm. It was carried out in 8 min by microwave irradiation using malachite green (MG) as a template molecule, α‐methacrylic acid (MAA) as a functional monomer, acetonitrile (ACN) as a porogenic solvent, ethylene dimethacrylate (EDMA) as a crosslinker, azodiiso‐butyronitrile (AIBN) as a thermal initiator. The resulted MIP fibers were pushed out from the capillary, eluted and inserted in the capillary again, which successfully used for the solid phase microextraction (SPME) procedure. The factors affecting the extraction of MG, such as the molar ratio of template/monomer (MG/MAA), concentration of NaCl, extraction and desorption time, and extraction and desorption solvents were investigated in detail. The selectivity of the MIP fibers was compared using MG analogues crystal violet (CV) and non‐analogue Sudan II. It was also employed for the pretreatment of trace MG in the fish feed followed by high‐performance liquid chromatography (HPLC) detection. Under the optimal conditions, the linear range of MG was 10‐600 μg/L, the detection limit (LOD) was 1.23 μg/L and the recovery of spiked fish feed sample was 88.7～113.9%.     

Cobalt(II)‐Catalyzed C?H Alkynylation/Annulation with Terminal Alkynes: Selective Access to 3‐Methyleneisoindolin‐1‐one

A highly efficient cobalt(II)‐catalyzed alkynylation/annulation of terminal alkynes assisted by an N,O‐bidentate directing group is described. This protocol is characterized by wide substrate scope utilizing cheap cobalt catalysts, and offers a new approach to 3‐methyleneisoindolin‐1‐one, which can be converted into an oxadiazine salt in one step. Moreover, the directing group could be removed in three steps.     

Monte Carlo simulation of full energy spectrum of electrons emitted from silicon in Auger electron spectroscopy

A Monte Carlo simulation including surface excitation, Auger electron‐ and secondary electron production has been performed to calculate the energy spectrum of electrons emitted from silicon in Auger electron spectroscopy (AES), covering the full energy range from the elastic peak down to the true‐secondary‐electron peak. The work aims to provide a more comprehensive understanding of the experimental AES spectrum by integrating the up‐to‐date knowledge of electron scattering and electronic excitation near the solid surface region. The Monte Carlo simulation model of beam–sample interaction includes the atomic ionization and relaxation for Auger electron production with Casnati's ionization cross section, surface plasmon excitation and bulk plasmon excitation as well as other bulk electronic excitation for inelastic scattering of electrons (including primary electrons, Auger electrons and secondary electrons) through a dielectric functional approach, cascade secondary electron production in electron inelastic scattering events, and electron elastic scattering with use of Mott's cross section. The simulated energy spectrum for Si sample describes very well the experimental AES EN(E) spectrum measured with a cylindrical mirror analyzer for primary energies ranging from 500 eV to 3000 eV. Surface excitation is found to affect strongly the loss peak shape and the intensities of the elastic peak and Auger peak, and weakly the low energy backscattering background, but it has less effect to high energy backscattering background and the Auger electron peak shape. Copyright © 2014 John Wiley & Sons, Ltd.     

Thermo-sensitive poly(DEGMMA-co-MEA) microgels: Synthesis,characterization and interfacial interaction with adsorbed protein layer

The novel microgels, poly[di(ethylene glycol) methyl ether methacrylate-co-2-methoxyethyl acrylate] poly(DEGMMA-co-MEA) microgels, were synthesized. The poly(DEGMMA-co-MEA) microgels were thermo-sensitive and exhibited a volume phase transitive temperature(VPTT) of 14–22 ?C. The incorporation of hydrophobic comonomer MEA shifted the VPTT of poly(DEGMMA-co-MEA) microgels to lower temperatures. The interfacial interaction of poly(DEGMMA-co-MEA) microgels and three model proteins, namely fibrinogen, bovine serum albumin and lysozyme, was investigated by quartz crystal microbalance(QCM). An injection sequence of "microgel-after-protein" was then established for the real-time study of the interaction of proteins and the microgels at their swollen and collapsed states by using QCM technique. The results indicated that the interfacial interaction of poly(DEGMMA-co-MEA) microgels and adsorbed protein layers was mainly determined by the electrostatic interaction. Because poly(DEGMMA-co-MEA) microgels were negatively charged in Tris-HCl buffer solution(p H = 7.4), the microgels did not adsorb on negatively charged fibrinogen and bovine serum albumin layers but strongly adsorbed on positively charged lysozyme layer. Stronger interaction between lysozyme and the microgels at collapsed state(i.e. at 37 ?C) was observed. Furthermore, the incorporation of MEA might weaken the interaction between poly(DEGMMA-co-MEA) microgels and proteins.     

Reaction kinetics of malachite in ammonium carbamate solution

The dissolution of malachite particles in ammonium carbamate (AC) solutions was investigated in a batch reactor, using the parameters of temperature, AC concentration, particle size, and stirring speed. The shrinking core model was evaluated for the dissolution rate increased by decreasing particle size and increasing the temperature and AC concentration. No important effect was observed for variations in stirring speed. Dissolution curves were evaluated in order to test shrinking core models for fluid-solid systems. The dissolution rate was determined as being controlled by surface chemical reaction. The activation energy of the leaching process was determined as 46.04 kJ mol^?1.     

FI催化剂配体的研究进展

FI催化剂作为一类新型聚烯烃催化剂,具有高活性、耐高温等特性,在催化聚合方面表现出良好的性能,不但可以催化乙烯与极性及非极性单体共聚,而且可以通过改变主催化剂苯氧基亚胺配体的结构,得到具有不同结构的聚合物。本文介绍了FI主催化剂的基本结构、合成方法、结构与催化性能的关系以及基于苯氧基亚胺配体基本结构的新型催化剂的研究进展。     

Rapid and Efficient Copper‐Catalyzed Finkelstein Reaction of (Hetero)Aromatics under Continuous‐Flow Conditions

A general, rapid, and efficient method for the copper‐catalyzed Finkelstein reaction of (hetero)aromatics has been developed using continuous flow to generate a variety of aryl iodides. The described method can tolerate a broad spectrum of functional groups, including N‐H and O‐H groups. Additionally, in lieu of isolation, the aryl iodide solutions were used in two distinct multistep continuous‐flow processes (amidation and Mg–I exchange/nucleophilic addition) to demonstrate the flexibility of this method.     

Epigenetic Genome Mining of an Endophytic Fungus Leads to the Pleiotropic Biosynthesis of Natural Products

The small‐molecule biosynthetic potential of most filamentous fungi has remained largely unexplored and represents an attractive source for the discovery of new compounds. Genome sequencing of Calcarisporium arbuscula, a mushroom‐endophytic fungus, revealed 68 core genes that are involved in natural product biosynthesis. This is in sharp contrast to the predominant production of the ATPase inhibitors aurovertin B and D in the wild‐type fungus. Inactivation of a histone H3 deacetylase led to pleiotropic activation and overexpression of more than 75 % of the biosynthetic genes. Sampling of the overproduced compounds led to the isolation of ten compounds of which four contained new structures, including the cyclic peptides arbumycin and arbumelin, the diterpenoid arbuscullic acid A, and the meroterpenoid arbuscullic acid B. Such epigenetic modifications therefore provide a rapid and global approach to mine the chemical diversity of endophytic fungi.     

Cooperative Crystallization of Heterometallic Indium–Chromium Metal–Organic Polyhedra and Their Fast Proton Conductivity

Metal–organic polyhedra (MOPs) or frameworks (MOFs) based on Cr³⁺ are notoriously difficult to synthesize, especially as crystals large enough to be suitable for characterization of the structure or properties. It is now shown that the co‐existence of In³⁺ and Cr³⁺ induces a rapid crystal growth of large single crystals of heterometallic In‐Cr‐MOPs with the [M₈L₁₂] (M=In/Cr, L=dinegative 4,5‐imidazole‐dicarboxylate) cubane‐like structure. With a high concentration of protons from 12 carboxyl groups decorating every edge of the cube and an extensive H‐bonded network between cubes and surrounding H₂O molecules, the newly synthesized In‐Cr‐MOPs exhibit an exceptionally high proton conductivity (up to 5.8×10^?2 S cm^?1 at 22.5 °C and 98 % relative humidity, single crystal).     

旋翼尾流与地面干扰时地面涡现象的研究

用Ｎ－Ｓ方程对近地飞行时旋翼尾流与地面干扰时产生的地面涡现象进行了数值计算旋翼对流场的作用由分布在特定区域内的动量源项模拟结果表明，旋翼尾流撞到地面后的卷起和轴向流动的拉伸作用是形成地面涡的原因；地面边界层形成的二次分离涡向地面涡内输入（与尾流所携带的涡量）相反的涡量，而使地面涡保持平衡；地面涡的存在和运动使旋翼附近流场大大改变